| Name | H9 6x4 Mixer Truck |
| Brand / Series | CAMC / H9 electric energy type |
| Drive type | 6x4 |
| Wheel base(mm) | 3600 |
| Quasi-tow mass(kg) | 34865 |
| Kerb Weight (kg) | 6805 |
| Rated GVW/ GVW (kg) | 6805/18000 |
| Overall dimension (mm) | 5915x2495x3200 |
| |
| Type | CAMC H9 flat roof Cab |
| Color | Standard color: red, yellow, blue, white; others: optional but charge |
| Parameter | With two berth,Berth curtain,Leather 4-spoke Steering Wheel,Rear window,electronic and Hydraulic reversal cab,power window,
hydraulically damped adjustable driver's seat and rigid adjustable co-driver's seat, heating & ventilation system, adjustable roof
flap, with stereo radio and MP3, and adjustable steering wheel, air horn, single berth with 4-point support fully floating
suspension and shock absorber with transverse stabilizer, safety belt. |
| Others | A/C, radio,MP3, one sleeper, curtain etc. |
| ENGINE |
| Supplier | CAMC-The Chinese most advanced truck Engine Producer |
| Model | |
| Type | Four-troke, water-cooled, in-line, wet-liner, direct-injection |
| Maximum power/horsepower(kw/hp) | 254/345 |
| Maximum rated speed(rpm) | 1900 |
| Max torque(N.m/rpm) | 1660/1100-1400 |
| Cylinders | 6 |
| Bore x Stroke (mm) | 118*150 |
| Displacement (L) | 9.84 |
| Controller type | Electrical |
| Air cleaner | Dry paper element |
| Emission Standard | Euro V |
| TRANSMISSION |
| Supplier | CAMC (same level as ZF technology) |
| Model | 9SDB2051A |
| Type | Mechanical & manual with servo & Synchronizer & creep |
| Speed ratio | 9 forward ratio:15.49, 12.07,8.35,5.67,4.07,2.96,2.05,1.39,1.00 |
| 1 reverse ratio:14.19 |
| CLUCH |
| Type | Single- plate dry diaphragm spring clutch, diameter 430(A) mm, hydraulically operating with air assistance |
| Plate diameter | 430mm |
| STEERING SYSTEM |
| Driving position | Left or Right hand drive available |
| Type | hydraulic steering with power assistance |
| Ratio | 22.2-26.2:1 |
| Supplier | CAMC |
| Front axle | CAMC technology steering axle with double T-cross section, Rated capacity:7.5T |
| Rear axle | CAMC technology 16T casting axle , with double reduction and differential locks between axles, Rated capacity:16T |
| ratio: 4.10 |
